Compact design meets the limited space operation requirement. Eyeball catching designed smooth outline and metal material applied for exposed parts, all provide robust construction of the A series three-pivot electric counterbalance forklift truck.
Front dual separated driving motors can realize the wheels forward or backward independently, the small turning radius is suitable for narrow channel; Imported reducer, high power driving motor provides a reliable and strong performance.
1 .High power pump motor and low noise gear pump, both improve the lifting speed and work efficiency.
2. Regenerative braking during deceleration is more energy saving and effectively .
1.Thanks to the new designed adjustable levers, the operator can work more comfortable. New designed dashboard is easy to see and provides friendly human-computer interaction and with running hours, self diagnosis functions and the battery power show.
2.Both the steering column and seat can be adjusted easily, every operator can find the best driving position.
3.Low vibration and suspension seat reduce the driver’s fatigue.
1. Sinking type battery layout provides good stability especially during cornering.
2.The soft landing system protects the forks from dashing against the ground.
1.Emergency switch is standard specification which meets the Euro safety regulation.
2.Both electronics and hydraulic system are equipped with overloading protection system.
3.Driving speed is automatically reduction during cornering.
1.Full opened battery cover is easy for battery service and changing.
2.The service engineer can remove the front floor board without any tool, it is convenient for the maintenance.
1. World famous controller, connectors, battery plug and emergency switch are applied to ensure the reliability of the performance and provides easy service.
2.High frequency MOSFET integrated control system provides accurate control of travelling, lifting and better adjustable performance that better matchs with the motor. No roll-back on ramp is also provided thanks to MOSFET controller. Motor brake is for regenerative braking during deceleration, direction changing, and downward slope.
|Manufacturer||HANGCHA GROUP CO.,LTD.|
|Manufacturers type designation||CPDS16-AD6-I||CPDS18-AD6-I||CPDS20-AD6-I|
|Drive: electric (battery or mains), diesel, petrol, fuel gas||electric||electric||electric|
|Operator type: hand, pedestrian, standing, seated, order-picker||seated||seated||seated|
|Load capacity/rated load (lbs)||3200||3500||4000|
|Load centre distance (in)||24||24||24|
|Load distance, centre of drive axle to fork (in)||14||14.2||14.2|
|Service Weight (lbs)||6884||7149||7657|
|Axle loading, laden front/rear (lbs)||9047/1368||9598/1522||10481/1589|
|Axle loading, unladen front/rear (lbs)||3177/3707||3177/4148||3376/4281|
|Tyres: solid rubber, superelastic, pneumatic, polyurethane||solid||solid||solid|
|Tyre size, front||18x7 - 8||18x7 - 8||200/50-10|
|Tyre size, rear||15x4.5 - 8||15x4.5 - 8||15x4.5 - 8|
|Wheels, number front rear (x = driven wheels)||2x/2||2x/2||2x/2|
|Tread, front (in)||4-Feb||35.8||36|
|Tread, rear (in)||6.9||6.9||6.9|
|Tilt of mast/fork carriage forward/backward (°)||6/6||6/6||6/6|
|Height, mast lowered (in)||78.5||78.5||78.5|
|Free lift (in)||5.7||5.7||5.7|
|Height, mast extended (in)||155.3||155.3||155.3|
|Height of overhead guard STD. (in)||80.3||80.3||80.3|
|Height of higher overhead guard OPT. (in)||83.9||84.8||84.8|
|Seat height (in)||39.4||39.4||39.4|
|Coupling height (in)||19.7||19.7||19.7|
|Overall length (in)||110.9||111.1||115.4|
|Length to face of forks (in)||74.7||74.9||79.1|
|Overall width (in)||42.8||42.8||44.1|
|Fork dimensions (in)||1.4/3.9/36.2||1.4/3.9/36.2||1.6/4.8/36.2|
|Fork carriage DIN 15 173 --- ISO 2328, class/type A,B||ISO2328 2A||ISO2328 2A||ISO2328 2A|
|Fork-carriage width (in)||39.4||39.4||39.4|
|Distance between fork-arms (in)||7.9/39.3||9.4/39.3||9.4/39.3|
|Ground clearance, laden, below mast (in)||3.9||3.9||3.9|
|Ground clearance, centre of wheelbase (in)||4.3||4.3||4.3|
|Aisle width for pallets 1000 x 1200 crossways (in)||127.4||127.4||131.6|
|Aisle width for pallets 800 x 1200 lengthways (in)||132.3||132.3||136.4|
|Turning radius (in)||61.2||61.2||65.4|
|Internal turning radius (in)||26.8||28.7||28.7|
|Travel speed, laden/unladen mph||9.9/9.9||9.9/9.9||9.3/9.3|
|Lift speed, laden/unladen fpm||74.8/92.5||72.8/88.6||68.9/88.6|
|Lowering speed, laden/unladen fpm||90.6/86.6||90.6/82.7||92.5/82.7|
|Drawbar pull, laden/unladen lbf||742/877||719/854||686/832|
|Max. Drawbar pull, laden/unladen lbf||2608/2585||2585/2563||2518/2473|
|Gradeability, laden/unladen %||16/18||15/17||13/15|
|Max. gradeability, laden/unladen %||20/20||18/20||15/18|
|Acceleration time, laden/unladen (0-10m)||4.7/4.3||4.8/4.4||4.9/4.5|
|Drive motor rating S2 60 min kW||4.75x2 AC||4.75x2 AC||4.75x2 AC|
|Lift motor rating at S3 15% kW||9.5 AC||9.5 AC||9.5 AC|
|Battery acc. to DIN 43 531/35/36 A,B,C, no||DIN43531 A||DIN43531 A||DIN43531 A|
|Battery voltage, capacity V/Ah||48/480||48/480||48/480|
|Battery weight lbs||595||595||595|
|Battery dimensions l/b/h(in)||32.7×24.8×24.7||32.7×24.8×24.7||32.7×29×24.7|
|Energy consumption acc. to VDI cycle kWh/h||4.6||5.0||5.5|
|Min. battery weight lbs||1876||1876||1986|
|Max. battery weight lbs||2207||2207||2427|
|Type of drive control||MOSFET/AC||MOSFET/AC||MOSFET/AC|
|Operating pressure for attachments bar||150||150||150|
|Oil volume for attachments l/min||35||35||35|
|Hydraulic Tank - capacity (drain & refill) gal||6.87||6.87||7.66|
|Sound level at the driver's ear according to EN / DIN 12 053 dB (A)||73||73||74|
|Towing coupling, type DIN||Φ24 Pin||Φ24 Pin||Φ24 Pin|
Add us to your inbox to stay up to date and learn more