Hangcha Electric Pneumatic Forklift With Lithium-ion 4,000-7,000lbs

Double tap to zoom

Features

High capacity Iron phosphate battery packs

Integrated Battery Management System (BMS) continually monitors energy management and ensures reliable operation.
HANGCHA provides Li-Ion battery with 5 years or 10000 hours warranty.

Excellent Ergonomic Design

1.The truck has a large operating space more than 50% larger than the traditional electric truck.

2.The dashboard in the driver’s cab is placed overhead and can be seen when the driver lifts her/his head, and the function buttons can be pressed easily.

3.For the optional integrated fingertip control system, the combined operating armrest integrates the emergency cut-off, horn and quadruple thumb switches, etc., is electrically controlled through the CAN bus and is highly reliable.

4.The enlarged brake pedal and appropriate regenerative braking function can effectively reduce the driver’s fatigue.

Advantages

1.The rear axle is provided with a flexible suspension system (for standard configuration and automatic deceleration at turns improve the driver’s comfort.

2.The high-frequency MOSFET integrated controller ensures smooth and accurate driving and lifting control, and has excellent speed regulation performance, good performance of electronic control matching the motor, functions of regenerative braking, reverse braking and anti-sliding on ramps, etc., and high safety and reliability.

3.The ultra-high power AC traction motor has a bridge structure.

4.An ultra-high power AC pump motor is used. The system has high efficiency, complete protection functions, built-in speed and temperature sensors, and greatly improved reliability and life.

Easy operations and maintenance

1.Internal Components Protected with Fully-sealed Hood, controllers, motors electrical components, etc. are sealed from dust and water.

2.The hood can be opened at a large angle facilitating the maintenance.

3.The battery packs can be easily removed by a pallet truck and can be repaired conveniently.

Safety

1.The optional OPS system can disable the lowering when the driver leaves the seat and enable high safety.

2.The standard configuration provides soft landing system. In addition, an optional lift buffering system is provided to protect the goods from falling and damaging the ground.

3.The handbrake can be optionally equipped with an alarm buzzer to prompt the driver to pull up the handbrake before leaving the truck.

4.A PIN code should be provided before entering the system. 99 sets of PIN codes are available for the administrator. The truck is highly secured and irrelevant personnel cannot start the truck.

Main Accessories

1.The main electrical components such as the controller, contactor, power plug, emergency cut-off switch, dashboard, accelerator, are all products of well-known
world brands.

2.The emergency cut-off switch equipped for the standard configuration complies with EU regulations.

3.The truck has passed the CE certification

Comfort

1.Owing to the low center of gravity and good stability, the driver feels comfortable during turning.

2.The ergonomically designed adjustable steering wheel makes the driver feel good. The seat can be adjusted back and forth by 8.3”. The operator can choose the best driving position.

3.New designed mast increases the wide view by 15%.

4.With friendly human-computer interfaces, the 4.33” True Color Screen instruments have good visibility and clear readings.

5.Silence, no pollution, energy saving and other advantages meet the environmental protection requirements.

Specifications

Manufacturer HANGCHA GROUP CO.,LTD.
HCFA Model XC20Li XC25Li XC30Li XC35Li
Manufacturers type designation CPD20-XD4-SI26 CPD25-XD4-SI26 CPD30-XD4-SI26 CPD35-XD4-SI26
Drive: electric (battery or mains), diesel, petrol, fuel gas Electric Electric Electric Electric
Operator type: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
Load capacity/rated load lb (kg) 4000(1810) 5000(2270) 6000(2720) 7000(3170)
Load centre distance in (mm) 24(600) 24(600) 24(600) 24(600)
Load distance, centre of drive axle to fork in (mm) 17.5(444) 17.5(444) 19(482) 19(482)
Wheelbase in (mm) 59.8(1520) 59.8(1520) 65(1650) 65(1650)
WEIGHT  
Service Weight lb (kg) 7980(3620) 8640(3920) 10450(4740) 11200(5080)
Axle loading, laden front/rear lb (kg) 11110/1500(5040/680) 12830/1543(5820/700) 14870/2414(6745/1095) 17190/1490(7800/880)
Axle loading, unladen front/rear lb (kg) 3571/4410(1620/2000) 3681/4960(1670/2250) 4431/6018(2010/2730) 4630/6570(2100/2980)
TYRES, CHASSIS  
Tyres: solid rubber, superelastic, pneumatic, polyurethane Pneumatic Pneumatic Pneumatic Pneumatic
Tyre size, front in (mm) 23×9-10 23×9-10 23×9-10 23×10-12
Tyre size, rear in (mm) 18×7-8 18×7-8 18×7-8 200/50-10
Wheels, number front rear (x = driven wheels) 2x/2 2x/2 2x/2 2x/2
Tread, front 42(1068) 42(1068) 42(1068) 42(1068)
Tread, rear 37.8(960) 37.8(960) 37.8(960) 37.8(960)
DIMENSIONS  
Tilt of mast/fork carriage forward/backward (°) 6/12 6/12  6/12  6/12 
Height, mast lowered in (mm) 78.7(2001) 78.7(2001) 84.6(2151) 84.6(2151)
Free lift in (mm) 5.5(140) 5.5(140) 5.7(145) 5.7(145)
Lift in (mm) 118.1(3000) 118.1(3000) 118.1(3000) 118.1(3000)
Height, mast extended in (mm) 159(4040) 159(4040) 162.8(4135) 162.8(4135)
Height of overhead guard STD. in (mm) 82.6(2100) 82.6(2100) 82.6(2100) 82.6(2100)
Seat height/stand height in (mm) 44(1120) 44(1120) 44(1120) 44(1120)
Coupling height in (mm) 16.9(430) 16.9(430) 16.9(430) 16.9(430)
Overall length in (mm) 132.6(3370) 132.6(3370) 132.6(3370) 132.6(3370)
Length to face of forks in (mm) 90.5(2300) 90.5(2300) 97.6(2480) 97.6(2480)
Overall width in (mm) 49.3(1252) 49.3(1252) 49.3(1252) 51.1(1298)
Fork dimensions in (mm) 1.6×4.8×42(40/122/1070) 1.6×4.8×42(40/122/1070) 1.8×4.8×42(45/122/1070) 1.8×4.8×42(45/122/1070)
Fork carriage DIN 15 173 --- ISO 2328, class/type A,B ISO2328 2A ISO2328 2A ISO2328 3A ISO2328 3A
Fork-carriage width in (mm) 43.3(1100) 43.3(1100) 43.3(1100) 43.3(1100)
Distance between fork-arms in (mm) 290/1100(11.4/43.3) 290/1100(11.4/43.3) 290/1100(11.4/43.3) 290/1100(11.4/43.3)
Ground clearance, laden, below mast in (mm) 3.9(100) 3.9(100) 3.9(100) 3.9(100)
Ground clearance, centre of wheelbase in (mm) 4.9(125) 4.9(125) 4.9(125) 4.9(125)
Aisle width for pallets 1000 x 1200 crossways in (mm) 147(3734) 147(3734) 155.7(3955) 155.7(3955)
Aisle width for pallets 800 x 1200 Lengthways in (mm) 154.8(3934) 154.8(3934) 163.5(4155) 163.5(4155)
Turning radius in (mm) 82.2(2090) 82.2(2090) 89.3(2270) 89.3(2270)
Internal turning radius in (mm) 25.7(655) 25.7(655) 28.7(730) 28.7(730)
PERFORMANCE DATA  
Travel speed, laden/unladen mph (km/h) 11.1/11.8(18/19) 11.1/11.8(18/19) 11.1/11.8(18/19) 11.1/11.8(18/19)
Lift speed, laden/unladen fpm (m/s) 88.5/110(0.450/0.560) 85/110(0.430/0.560) 76.7/106(0.390/0.540) 72.8/106(0.370/0.540)
Lowering speed, laden/unladen fpm (m/s) 88.5/82.6(0.450/0.420) 92.5/82.6(0.470/0.420) 88.5/82.6(0.450/0.420) 92.5/82.6(0.470/0.420)
Drawbar pull, laden/unladen lbf (N) 2925/3150(13000/14000) 3825/4050(17000/18000) 4500/4725(20000/21000) 4612/4725(20500/21000)
Max. Drawbar pull, laden/unladen lbf (N) 3375(15000) 4275(19000) 4950(22000) 5175(23000)
Gradeability, laden/unladen % 20/20 20/20 20/20 20/20
Max. gradeability, laden/unladen % 20/20 20/20 20/20 20/20
Acceleration time, laden/unladen (0-10m) 4.9/4.8 5.0/4.9 5.3/5.1 5.4/5.2
Service brake Hydraulic Hydraulic Hydraulic Hydraulic
Parking brake Mechanical Mechanical Mechanical Mechanical
ELECTRIC-ENGINE  
Drive motor rating S2 60 min HP (kW) 22.3(16.6)AC 22.3(16.6)AC 22.3(16.6)AC 22.3(16.6)AC
Lift motor rating at S3 15% HP (kW) 34.2(25.5)AC 34.2(25.5)AC 34.2(25.5)AC 34.2(25.5)AC
Battery voltage, Std. V/Ah 80/271 80/271 80/404 80/404
Battery voltage, Opt. V/Ah 80/404 80/404 80/542 80/542
Min. battery weight lb (kg) 485(220) 485(220) 485(220) 485(220)
Max. battery weight lb (kg) 617(280) 617(280) 617(280) 617(280)
Type of drive control MOSFET/AC MOSFET/AC MOSFET/AC MOSFET/AC
Manufacturer INMOTION INMOTION INMOTION INMOTION
ADDITION DATA  
Operating pressure for attachments psi (bar) 2538(175) 2538(175) 2538(175) 2538(175)
Oil volume for attachments l/min 65 65 65 65
Hydraulic Tank - capacity (drain & refill) liter 28 28 28 28
Sound level at the driver´s ear according to EN / DIN 12 053 dB (A) 75 75 75 75
Towing coupling, type DIN Φ25 Pin Φ25 Pin Φ25 Pin Φ25 Pin

DON'T MISS OUT ON THE LATEST DEALS

Add us to your inbox to stay up to date and learn more

LOOKING FOR SOMETHING SPECIFIC? CONTACT US!