Hangcha 4-wheel Drive Rough Terrain 5,000-7,000lbs

Double tap to zoom

Features

Concept

The multipurpose concept refers to the capability of the forklift truck to work in many different areas, with a great performance no matter how hard the conditions are.

Performance

The “three in the front and one in the rear” full-floating hydraulic transmission gearbox, with 2WD and 4WD switch function, can provide higher running speed and stronger gradeability; The drive axle is equipped with wide-base deep tread tyre, wet brake, differential mechanism with electronic lock, as well as reinforced steering drive axle, and can better adapt to special working conditions.

Reliability

Dual air filter、extra capacity combined radiator with serpentine wave and optimized heat dissipation channel enhance the heat dissipation capability to keep engine reliability even in heavy-duty applications. Oscillating steer axle allows either wheel to step over obstacles keeping the truck and load level.

Maneuverability

For example, the distance to ground is 270mm for 3.0t, it offers greater maneuverability and keep the truck moving in the roughest of applications, and yet we keep a very low center of gravity, by using a distributed weight in the forklift, giving it an excellent stability.

Productivity

1.The new Dynamic load sensing hydraulic steering system contributes to reduce loss of hydraulic and improve energy efficiency.

2.The transmission system gets the maximum performance from the engine without reaching high revolutions, which permits fuel saving, noise level reduction and engine life increase.

Comfortable Operation

1.In developing the rough terrain forklift, comfort and easy operation is always considered, for example, improved vibrating levels, compound engine damper and full floating seat and cabin are all applied. Comfortable also contribute to increased productivity and reduced the noise.

2.The extra foot space is provided to reduce operator fatigue significantly, non-slip step makes getting in and out easy and safe. The new designed steering wheel、new brake system and the easy-to-operate levers provide total handling operation.

Environmental Friendliness

Each model employs a specially developed engine for the optimum balance of power and superior environmental performance, the truck is in compliance with EU Ⅲ and EAP Ⅲ control regulation.

Easy Maintenance

1.The easy-to-open hook provides quick access to the engine compartment.

2.The two-piece design makes the floorboard easy to lift and remove for access to the power train.

3.The fasteners of the radiator cover can be turned easily by hand to enable quick inspections or servicing.

Specifications

Manufacturer HANGCHA GROUP CO., LTD.
HCFA Model RT25F RT30F RT35F
Manufacturer's type designation CPCD25-XW33C-RT4 CPCD30-XW33C-RT4 CPCD35-XW33C-RT4
Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel
Operator type: hand, pedestrian, standing, seated, order-picker Seated Seated Seated
Rated capacity/rated load lb (kg) 5000(2289) 6000(2750) 7000(3208)
Load centre distance in (mm) 23.6(600) 23.6(600) 23.6(600)
Load distance, centre of drive axle to fork in (mm) 23(585) 24(600) 24(600)
Wheelbase in (mm) 74(1880) 74(1880) 74(1880)
Weight    
Service Weight lb(kg) 10692(4850) 11772(5340) 12346(5600)
Axle loading, laden front/rear lb(kg) 13646(6190)/2557(1160) 15873(7200)/2513(1140) 17416(7900)/2645(1200)
Axle loading, unladen front/rear lb(kg) 4696(2130)/5996(2720) 5158(2340)/6613(3000) 5071(2300)/7275(3300)
Tyres, Chassis    
Tyres: solid rubber, superelastic, pneumatic, polyurethane Pneumatic Pneumatic Pneumatic
Tyre size, front 12-16.5-14PR 14-17.5-14PR 14-17.5-14PR
Tyre size, rear 10.0/75-15.3-14PR 10.0/75-15.3-14PR 10.0/75-15.3-14PR
Tread, front in(mm) 2x/2x 2x/2x 2x/2x
Tread, rear in(mm) 49.2(1250) 49.2(1250) 49.2(1250)
Dimensions 46.9(1190) 46.9(1190) 46.9(1190)
Tilt of mast/fork carriage forward/backward (°) 10/12 10/12 10/12 
Height, mast lowered in(mm) 87.2(2215) 92.5(2350) 92.5(2350)
Free lift in(mm) 5.5(140) 5.7(145) 5.7(145)
Lift in(mm) 118.1(3000) 118.1(3000) 118.1(3000)
Height, mast extended in(mm) 162.3(4122) 163(4142) 163(4142)
Height of overhead guard (cabin) in(mm) 94.1(2390) 95.3(2420) 95.3(2420)
Overall length in(mm) 169.5(4305) 170(4320) 170(4320)
Length to face of forks in(mm) 121.5(3085) 122(3100) 122(3100)
Overall width in(mm) 61.3(1557) 63(1599) 63(1599)
Fork dimensions ISO 2331 in(mm) 1.6×4.8×48.3(40×122×1220) 2×4.8×48.3(50×122×1220) 2×4.8×48.3(50×122×1220)
Fork carriage DIN 15 173 --- ISO 2328, class/type A,B B B B
Fork-carriage width in(mm) 45.3(1150) 45.3(1150) 45.3(1150)
Distance between fork-arms in(mm) 11.4-45.3(290-1150) 11.4-45.3(290-1150) 11.4-45.3(290-1150)
Ground clearance, laden, below mast in(mm) 9.4(240) 10.6(270) 10.6(270)
Ground clearance, centre of wheelbase in(mm) 10.2(260) 11.4(290) 11.4(290)
Aisle width in(mm) 208.9(5305) 209.4(5320) 209.4(5320)
Turning radius in(mm) 129.9(3300) 129.9(3300) 129.9(3300)
Performance Data    
Travel speed, laden/unladen mph 14.9/16.2(24/26) 14.9/16.2(24/26) 14.9/16.2(24/26)
Lift speed, laden ft/min 122/126(0.62/0.64) 96.4/100.4(0.49/0.51) 96.4/100.4(0.49/0.51)
Lowering speed, laden fpm(m/s) 98.4/86.6(0.5/0.44) 98.4/88.6(0.5/0.45) 98.4/88.6(0.5/0.45)
Drawbar pull, laden 40000 45000 45000
Gradeability, laden % 58 55 52
Service brake Hydraulic Hydraulic Hydraulic
Parking brake Mechanical Mechanical Mechanical
Combustion-engine    
Engine manufacturer/type YANMAR 4TNE98 YANMAR 4TNE98 YANMAR 4TNE98
Engine power according to DIN ISO 1585 56.5(42.1)/2300 56.5(42.1)/2300 56.5(42.1)/2300
Rated speed 144.6(196)/1700 144.6(196)/1700 144.6(196)/1700
Number of cylinders/displacement 4/202.5(3319) 4/202.5(3319) 4/202.5(3319)
Battery voltage/nominal capacity 12/90  12/90  12/90 
Addition data    
Hydraulic Tank - capacity (drain & refill) gal (liter) 16(60) 16(60) 16(60)
Fuel tank capacity gal (liter) 16(60) 16(60) 16(60)

DON'T MISS OUT ON THE LATEST DEALS

Add us to your inbox to stay up to date and learn more

LOOKING FOR SOMETHING SPECIFIC? CONTACT US!