Case IH TD102

Double tap to zoom

Overview

The Case IH TD102 pull-type disc mower features a smooth ride, clean cut, superior trailing ability and narrow transport width, plus easy tractor hookup using a simple clevis hitch.

Features

Superior Crop Flow

The Case IH TD102 pull-type disc mower features a modular cutterbar design for superior crop flow that reduces streaking and ensures quick mowing. The cutterbar is designed with:

  • Shock protection to minimize repair expense
  • Discs protected from internal gear damage by the drive hub
  • Crop deflector shields located behind each end of the cutterbar to direct cut crop into a wide swath inside the tire path
  • Two end discs that co-rotate to provide a narrower swath
  • Able to adjust swath from 60 in–95 in (1.5 m–2.4 m)
  • Left cutterbar shield is hinged for easy service access

 

80-degree Constant Velocity Joint

  • Overload protection is standard
  • Primary PTO uses an 80-degree constant velocity joint at the tractor end to permit tight turns, reduce noise and extend service life
  • Standard tractor tire bumpers protect PTO driveline and tractor tires


Adjustable From 2-10 Degrees

Tilt is adjustable from 2–10 degrees using a mechanical turnbuckle.

Easy Transport

Attaching and detaching the mower from the tractor is easily accomplished with a  simple clevis hitch . The TD102 can be pulled by lighter-weight tractors , as weight is pulled versus carried on a 3-point hitch.

  • Transport width is just 10 ft 10 in (3,300 mm) when end shields are folded
  • Removable parking jack stand is stored on top of tongue assembly
  • Hydraulic tongue swing cylinder powers the unit from transport to operating position
  • Has a 12-in (305-mm)-minimum cutterbar ground clearance in transport position
  • Hinged right-side cutterbar shield folds up for narrow transport
  • Safety tow chain standard
  • Low transport height eliminates the need for implement lights

Specifications

Make Case IH
Model TD102 Pull-Type
Mower Size  
Number of Discs 8
Position relative to Tractor Trailing, side-pull
Cutter Bar  
Cutting width, ft in (m) 10' 4" (3.15)
Swath width, ft in (m) 7' 11" (2.41)
Cutting height, in (mm) 0.95-3.2 (24-81)
Mowing arc, +/- from horizontal, degrees Trailing wheels follow ground
Breakaway angle, degrees, or description Breakaway latch, spring-loaded
Discs  
Knives per disc 2
Disc speed, rpm 3000
Disc cutting diameter, in (mm) 19.7 (500)
Drive between discs, bevel or spur gear Bevel gears in sealed modules
Tractor Requirements  
Tractor horsepower (kW) 60 (45)
PTO rated speed, rpm 540
Three-point hitch category, or drawbar Pin to drawbar
Hydraulic circuits required Two (one single, one double-acting)
Dimensions and Weight  
Transport width, ft-in (m) 10' 10" (3.30)
Transport length, ft-in (m) 15' 8" (4.78)
Transport height, ft-in (m) 5' 2" (1.57)
Weight, lb (kg) 2,610 (1186)
Trailing Tires  
Trailing tire size 27x9.5-15, 6PR
Sales Literature  
Literature number CIH7180803
Literature date 2009
Manual  
Manual number --
Manual date --
Entry Date  
Manufacturing Status Current
First Entry Date 12/1/2008
Revision Date 6/1/2013
Print This Page PRINT

DON'T MISS OUT ON THE LATEST DEALS

Add us to your inbox to stay up to date and learn more

LOOKING FOR SOMETHING SPECIFIC? CONTACT US!