Case IH Farmall 105N

Double tap to zoom


The Farmall 105N is available with your choice of ROPS operator area or climate controlled Cab. The 105 HP engine and robust hydraulic system powers you through all your orchard tasks.


Farmall N Platform

The platform on both Farmall N Cab and ROPS models is ISO mounted to reduce noise and vibration. Features include:

• An ergonomic operator environment for long days in the seat
• A tilt and telescoping steering column for optimal positioning and fatigue-fighting operation
• A digital instrument cluster that monitors PTO and ground speed for accurate spraying and dusting operations


Farmall N ROPS Models Feature:

• An adjustable vinyl seat with operator's-presence sensor and retractable seat belts
•A foldable mid-mounted roll bar that lets you maneuver under low-hanging vines


Farmall N Cab Models Feature:

• Heating and air conditioning to keep you comfortable
• Two external air filters that remove allergens and dust and provide a continuous supply of fresh air
• Tinted glass for superior visibility
• A deluxe cloth seat with operator’s-presence sensor and retractable seat belt for your safety
• Two wide doors for easy access from either side
• Front and rear windows that open fully
• A rear cab access panel and separate access point to route harnesses or cables


Engine and Axle Options

Engine Options

All Farmall® N Series tractors are powered by a 4-cylinder Tier 3-compliant diesel engine that's clean burning, fuel efficient and features:

• 2.9 L (179 CID) on the Farmall 75N
• 3.9 L (238 CID) on the Farmall 95N and 105N
• Bosch fuel injection

Axle Options

The Farmall 75N is avialable with 2WD or MFD axles. The Farmall 95N and 105N are MFD only

• A 55-degree turn angle on both the MFD and 2WD axles provides maximum maneuverability in tight spaces
• The standard differntial lock on rear axles provides added traction in slippery, tough conditions
• Up to 11 degree axle oscillation provides smooth travel over rough terrain.​​



Transmission Options

Case IH offers two transmission options on the Farmall N Series tractors. Both transmissions provide:

• More convenience and speeds than found on a typical utility tractor
• Extra-slow speeds, including three gears below 1 mph (1.6 kph) for precise movement in tight quarters
• Optional hydraulically engaged wet clutch for smoother performance
• Digital ground-speed display ideal for spraying, fertilizing and planting

16 X 16 Standard Transmission

Standard 16x16 transmission with mechanical shuttle provides:

• Four speeds in each of four ranges
• The ability to shift from forward to reverse in any gear with a synchronized mechanical shuttle lever
• A shuttle lever located on the left, freeing your right hand for other controls
•A top speed of 17 mph (30 kph), depending on tires
•An independent parking brake

32 X 16 Power Shuttle

Optional 32x16 Power Shuttle Transmission

• Eliminates the need to clutch
• Ideal for loader-intensive applications
•Wet clutch pack helps extend the Power Shuttle life
•The Power Shuttle control is located on the left side of the tilt/telescoping steering column, leaving your right hand free to work implement controls


Make Case IH
Model Farmall 105N Narrow (2012-2015)
Engine Performance  
Advertised Engine Power, Rated, hp (kW) 106 (79)
Maximum Engine Power, hp (kW) Same as advertised
Rated Engine Speed, rpm 2300
Power Boost, hp (kW) No Boost
Fuel Tank capacity, gal (L) 20 (77)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) No DEF
PTO Performance  
PTO Horsepower, Basic / Optional Transmission, hp (kW) 92 (68.6)
PTO Speeds, rpm 540 std; 540 / 1000 opt.
PTO operational Type (Independent; Live; Continuous) Independent
Basic Engine  
Engine Make Case IH FPT
Engine Model 4.5 L
Number of Cylinders 4
Displacement, cu in (L) 274 (4.5)
Engine Bore, in (mm) 4.095 (104)
Engine Stroke, in (mm) 5.20 (132)
Block Design, Replaceable Liners Parent bore block
Aspiration, Turbocharged or Naturally Aspirated Turbocharged, intercooled
Fuel System  
Fuel System Description Rotary-Distributor Type
Fuel System Control, Electronic or Mechanical Mechanical
Fuel Injection to combustion chamber, Direct or Indirect Direct
Emission and Exhaust Treatment  
Emission Level, US EPA Tier Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) No
Exhaust Gas Recirculation (EGR) No
Cleanup Catalyst (CUC) No
Diesel Oxidation Catalyst (DOC) No
Diesel Particulate Filter (DPF) No
Exhaust Pipe, Vertical stack or Horizontal Horizontal
Cooling System  
Fan Drive Type Belt
Electrical System  
System Rating, Volts 12
Alternator Rating, Amps 120
Basic Transmission Configuration  
Manufacturer's Description 16 x 16 w/Mechanical Shuttle
Transmission Type 4 Synchronized Speeds in 4 Ranges
Number of Forward / Reverse Speeds 16F / 16R
Maximum Speed Forward, mph (kph) 18.3 (29.5)
Creeper Range Available See option w/Creeper
Shuttle (Forward-Reverse) Available Standard
Optional Transmission 1  
Manufacturer's Description 32x16 Power Shuttle
Transmission Type Power Shuttle with Hi/Lo
Number of Forward / Reverse Speeds 32F / 16R
Optional Transmission 2  
Manufacturer's Description Optional Creeper; 44x16
Transmission Type Shuttle + Creeper
Number of Forward / Reverse Speeds 44F / 16R
Wheel or Track Configuration  
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer Front Steer
Rear Axle Assembly  
Final Drive Location and Description Inboard planetary
Axle Output End, Flange or Bar Flange
Axle Bar Diameter, in (mm) No bar axle
Front Axle  
Suspended Front Axle Available No
Service Brake Type Wet disc
Hydraulic System  
Hydraulic System Type Open Center
Main Hydraulic Pump Type Dual Gear
Implement Pump Flow, gpm (Lpm) 16.9 (64)
Optional Pump Flow, gpm (Lpm) No option
Number of Standard Remote Valves 2 std, 3rd opt.
3-Point Hitch Features  
3-Point Hitch Category Category 1 / 2
Optional Hitch Category No option
Draft Sensing or Lift Control Draft Control optional
Draft Link Ends Telescopic Fixed
3-Point Hitch Lift Capacity  
Standard Lift Capacity 24 Inches behind pin, lb (kg) 4,400 (1998)
Optional Lift Capacity 24 Inches behind pin, lb (kg) No option
Standard Lift Capacity at lift pin, lb (kg) np
Optional Lift Capacity at lift pin, lb (kg) No option
Drawbar Description Swinging
Wheelbase / Trackbase  
Wheelbase, 2WD, in (mm) No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) 85.6 (2175)
Length, 2WD, incl. Hitch/Drawbar, in (mm) No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) 158 (4015)
Vertical Dimensions  
Height to Top of Cab, in (mm) 90.7 (2303)
Height to Top of ROPS raised, in (mm) 91.6 (2326)
Width w/Tires or Tracks  
Overall Width, with standard wheels or tracks, in (mm) 53.4 (1356) MFD minimum
Weight (w/Tires or Tracks)  
Weight, 2WD w/ROPS, lb (kg) No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) 5,820 (2640)
Weight, 2WD w/Cab, lb (kg) No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) 6,107 (2770)
Weight, Total allowable, w/maximum ballast, lb (kg) np
Tire / Track Size  
Front Tire Size, 2WD No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track 7.50 R18, R1
Rear Tire Size or Track Width 14.9 R28; 380/85 R28, R1
Sales Literature  
Literature Number --
Literature Date --
Secondary Literature Source  
Secondary Literature Number --
Secondary Literature Date --
Other Documentation  
Document Number TA-1356-13
Document Date 9/1/2013
Status and Entry Dates  
Manufacturing Status, Current or Archive Archive 2016
First Entry Date 11/1/2013
Revision Date Archived 28June2016


Add us to your inbox to stay up to date and learn more