Krone EasyCut R 320

Double tap to zoom

Overview

Krone EasyCut R 320 Rear-Mounted Disc Mowers come with manual or hydraulic ground pressure control. The design of this model offers low-maintenance and frictional driveline without belts. It is standard with Krone SafeCut disc protection. The Cantilever guards ensures more smooth crop flows.

Features

The Cutterbar: 
Krone developed the satellite driveline comprises massive spur gears with up to 66 teeth which transfer the power all the way down to the very last disc. Revolving at lower speeds, the large-diameter gears always have a number of teeth in mesh at any one time, giving quiet running, ultimate efficiency and maximum longevity. With each of the auxiliary gears driving just one disc, it is exposed to only minimum mechanical strain.

SafeCut: 
• Full driveline protection
• Neighboring discs will not collide
• No wear and damage
• Quick roll pin change, minimum costs

The situation is familiar to every farmer – a disc hits a foreign object, gets damaged and needs replacing. In this situation, Krone SafeCut offers a maximum of protection. The DLG Gold winning new disc shear-off system brings a new level of protection and operational reliability to the EasyCut mowers with and without CV conditioner. SafeCut is standard equipment on all EasyCut F and R disc mowers.

SmartCut:
Forget about stripes With some discs turning in pairs towards each other and others away from each other, it was necessary to redesign the degree of blade overlap to ensure cleanest cuts. Therefore we increased the overlap between those discs that turn outwards – a modification that leads to stripeless cuts in light and young material. Vice versa, a larger gap between the blades that turn towards each other encourages the smooth flow of large masses to the rear.

DuoGrip:
Forget about stripes With some discs turning in pairs towards each other and others away from each other, it was necessary to redesign the degree of blade overlap to ensure cleanest cuts. Therefore we increased the overlap between those discs that turn outwards – a modification that leads to stripeless cuts in light and young material. Vice versa, a larger gap between the blades that turn towards each other encourages the smooth flow of large masses to the rear.

Clean Cuts:
Adjusting the ground pressure is easy: Adjusting the spring tension manually is easy and straightforward, because you simply refi t the pin. Increase the tension to decrease the ground pressure.  

Convenience: 
Enjoy superior operator comfort from the hydraulic suspension control system. Adjust the pressure flexibly on the move and release the spring tension from the seat before you remove the mower from the tractor

Safe Road Travel: 
The special design shifts the machine weight to the middle of the tractor, distributing it more uniformly across the axle and the linkage for better ride quality and better visibility in the rear-view mirrors. There is nothing in the way that might obstruct your view.

Fold It From The Seat: 
The machine swings hydraulically into an upright position and beyond the dead center point. The EasyCut R 320 CV and R 360 models use a double-acting ram to swing the machine into a 124° position. Both versions fold the mower actively up and down for smooth and easy changeovers.

The machine swings hydraulically into an upright position and beyond the dead center point. The single-acting ram on the EasyCut R 280 and R 320 models employs an accumulator to move the machine into a 110° position whereas the EasyCut R 320 CV and R 360 models use a double-acting ram to swing the machine into a 124° position. Both versions fold the mower actively up and down for smooth and easy changeovers.

Specifications

  EasyCut R 320
Work width                                     Approx. mm 3,160 (10'4")
Transport height                             Approx. mm 3,900 (12'6")
Upright transport position 110°
No. of discs 5
No. of drums 2
SafeCut Standard
Quick-change blades Standard
Standard pto speed                                    rpm 540
Optional pto speed                                      rpm 1,000
Dead weight                            Approx. kg (lbs) 840 (1,852)
Power requirement                   Approx. kW/hp 50 / 68
Mechanical pressure control Standard
Hydr. pressure control Option (1 da spool)
No. of required spools 1 sa
Link arm pins Cat II
Work rate                                     Approx. ha/h
                                                           (acres/h)
3.5 - 4.0
(8.6 - 9.9)

DON'T MISS OUT ON THE LATEST DEALS

Add us to your inbox to stay up to date and learn more

LOOKING FOR SOMETHING SPECIFIC? CONTACT US!