Double tap to zoom


The Kuhn AXIS 50.1 H-EMC-W is a part of the Kuhn Axis H-EMC-W range and offers a unique combination of innovative technologies to meet the expectations of today’s farmers. Premium features include CDA distribution, ISOBUS options, the hydraulic disc drive and the integration of EMC technology for adjusting the application rate separately and continuously for each disc. Additionally, border spreading can be accomplished on either side by changing disc speed and drop point.

These machines are designed for precise spreading without the need for manual adjustments, you can simply concentrate on driving the tractor.


CDA: Unrivaled Accuracy

There are two important features that make the CDA (Coaxial Distribution Adjustment) system unique:

  1. The pivoting hopper base enables quick adaptation to various fertilizers and working widths by adjusting the drop point of the fertilizer onto the spreading discs.
  2. Specially designed metering outlets close to the center of the discs allow multiple supply points to the paddles. This helps ensure constant fertilizer flow and an even spread pattern.

Kuhn Electronics

ISOBUS: Reduce the Number of Terminals Needed (Specific Noted Machines)

ISOBUS, the universal language, allows different equipment (tractor, machine, home computer) to communicate with each other. You can monitor and transmit information about different machines with one single terminal, the Kuhn CCI 100 or any other ISOBUS compatible terminal. This allows compatibility with all ISOBUS tractors to simplify operation.

EMC: Independent Disc By Disc

Electronic Mass Flow Control (EMC) is a unique technology, well-established and proven after years of experience. It measures and continuously adjusts the application rate on each disc separately for all hydraulically driven Axis models for those seeking complete flexibility and ultimate precision.

Weighing System: Simple Application Regulation

Two weigh cells in cooperation with the electronic terminal (ISOBUS) allow you to adapt the application rate automatically while spreading. Every second the terminal checks if the flow corresponds to the programmed rate and adjusts it for precision and control.

GPS Control

Utilize your existing GPS virtual terminal on ISOBUS machines. You may also purchase the CCI virtual terminal from Kuhn for ultimate plug-and-go simplicity on ISOBUS machines. This allows you to tailor your application to your soil’s potential while saving significant amounts of fertilizer. Please contact your dealer to verify outside ISOBUS virtual terminal capabilities. Software by provider maybe required for premium features.


Working width (inches) 59' - 164'
Working width (m) between 18 and 50
Capacity (min.) (cu.ft.) 141
Capacity (min.) (l) 4000
Capacity (max.) (cu.ft.) 141
Capacity (max.) (l) 4000
Max. effective load (kg) 4000
Max. effective load (lb) 8818
Weight approx. (kg) 830
Weight approx. (lb) 1830
Drive Hydraulic
Outlet shutter control Electric cylinders
Application rate control EMC. weighing system and proportional to travel speed
Application (kg/ha) Up to 500 kg/min. or 500 kg/ha in 30 m at 20 km/h
Application lb/acre. 2.7 lbs per acre - 446 lbs per acre
Working width adjustment until 8 widths


Add us to your inbox to stay up to date and learn more