The main beam is supported by a side-mounted, triangular reinforcement welded along the length of the front section. This strengthens the beam in this high-stress area and gives substantial advantages when compared to a conventional plow design.
One-Piece Main Link
Designed for strength and long life, the main link is assembled with either bronze or steel bushings, depending on the model of plow.
Easy to Adjust Skimmers
Each skimmer is totally independent left from right and is firmly held in a sheath-like support. The skimmers are shear bolt protected and are adjustable in three directions:Forwards and backwards – with a choice of three positions, the sheath bolts to the leg support via countersunk holes to avoid any risk of free play.Up and down – rapid and precise height adjustment (7 ½” of adjustment) also with countersunk holes in the skimmer leg for easy locking of the leg at the desired height.Side to side – for correct adjustment in relation to disc coulter (where fitted).
Front Furrow Width/Angling Adjustment
The front furrow width is adjusted to its optimum setting according to the tractor linkages and ground conditions. Because of the parallelogram of the two linkages, any adjustment in front furrow width automatically adjusts the angling of the plow, allowing the tractor to always pull in perfect line. Adjustments are quickly carried out by simply adjusting the turnbuckle or by activating the hydraulic cylinder.
Multiple Moldboard Options
Share Point Options
Plow Leg Protection
Trash Burial Options
Standard Rubber Depth Wheel
The depth wheel follows any change of plowing width. It features simple bolt adjustments with the ability to set left and right sides independently. It can be placed in many locations on the frame to ensure optimum positioning for all conditions.
|Model||Multi-Master 183 OL 7(5E+1+1)|
|Number of bottoms per side||7|
|Extendable by one bottom||No|
|Standard moldboards||H4 long helicodial|
|Hydraulic rollover with 1 cylinder||Standard|
|Maximum tractor power for T version||385 hp (283 kW)|
|Maximum tractor power for NSH version||-|
|Approximate machine weight for T version||6,193 lbs (2,810 kg)|
|Approximate machine weight for NSH version||-|
|Working width||14", 16", 18", or 20" (35, 40, 45, or 50 cm) delivered at 18" (45 cm)|
|Underbeam clearance||31.5" (80 cm)|
|Point to point clearance for T models||35" (89 cm)|
|Point to point clearance for NSH models||-|
|Offset and angling adjustment||Hydraulic offset and mechanical angling adjustment|
|Hitch||Cat. 3 cross shaft with swift hitch|
|Hydraulic beam folding||Standard (allows work in-furrow)|
|Adjustable depth wheel with tire||690 x 320 mm standard|
|Maximum outside tractor tire width when working on-land||10'6" (3.2 m)
Add us to your inbox to stay up to date and learn more