Double tap to zoom

Features

The fully redesigned Kuhn Knight RA 136 Helix Reel Auggie mixer provides outstanding durability and performance. From high amounts of processed roughages to wet, heavy rations, the RA 136 Helix mixer meets the needs of even the most demanding producers.

The all-new, open-concept Helix Reel offers faster, more consistent mixing and improved load leveling with any ration. Strengthened body and drive components provide superior dependability and long life. With a low horsepower requirement, the RA 136 Helix mixers use less fuel for more economical operation. This new design also features a lowered right side for easier loading.

This mixer is available as a truck, trailer and stationary model. Trailer model specifications are listed below. For truck-mounted machine specifications, click on the “Leaflet” icon at right.

Helix Reel Technology

The Helix Design
The optional Helix Reel has a robust build. Through years of use in commercial reel machines, it has proven to withstand the toughest conditions. The helical design evens pressure across the length of the reel for smooth, efficient operation.

Open-Center Reel
The open-center design eliminates obstructions and provides outstanding feed movement for unparalleled mixing action. The benefits are unmistakable, with faster, more consistent mixing across the entire load, improved load leveling and optimized mixer space utilization for the ultimate ration quality.

Superior Mixing of Wet By products
A mix bar runs diagonally across the center of the reel providing consistent feed movement throughout the entire mixing chamber. The crossbars efficiently move feed around the outside of the chamber, while the secondary mixing action from the mix bar helps ensure a fast, even mix even in wet, heavy rations with large amounts of distillers grains.

Enhanced Performance for Roughage and Grain
The cutting-edge design has been extensively tested with a wide variety of rations. The results are clear – from high amounts of processed roughages to wet, heavy rations, the new RA 100 Series Helix mixers set the new standard for dependability and quality mixing performance to meet the needs of even the most demanding producers.

Excellent Load Leveling
With all potential obstacles removed from the center of the reel, feed is free to flow unobstructed from end to end. This greatly improves mixing action and helps optimize load leveling in any ration. Even leveling allows consistent use of the machine’s full capacity for maximum efficiency.

Fast, Even Unloading and Cleanout
Cleanout speed is a key factor that can limit feeding efficiency costing valuable time and money. The Helix design provides fast, consistent unloading with a quicker, more complete cleanout than competitive models. The result is optimum performance, allowing the operator to move on to the next batch faster.

Bolted Auger Flanges

Bolted flanges on the upper and lower augers provide strong connections between the auger tubes and drive shafts for superior durability. They also allow for a single-piece front panel that gives added strength and provides a clean look.

Heavy-Duty Discharge Door

The door discharge and pivot have been redesigned and strengthened for extended service life. The linkage incorporates two ball pivots for smooth operation.    

Upgraded Rear Drive Shaft

A heavy, 1 ½” rear drive shaft provides added strength for dependable service, even in rations heavy in distillers grains.

Easy Access Door

The new single-handled latch provides easy access to the oil bath. An improved seal keeps oil in, and dirt and debris out, to help minimize wear on drive components and maintain a cleaner appearance.

Specifications

Specifications RA 136
Capacity - no extensions (m3) 10.2
Capacity - no extensions (cu.ft) 360
Number of augers 2
Overall height - no extensions (cm) 262
Overall height - no extensions (in) 103
Overall width - without options (cm) 251
Overall width - without options (in) 99
Tread width (cm) 239
Tread width (in) 94
Weight (kg) 4713
Weight (lb) 10390
Minimum power requirement for PTO (kW) 56
Minimum power requirement for PTO (hp) 75
Maximum load (kg) 4899
Maximum load (lb) 10800
Door opening (h x w, cm) 91 x 51
Door opening (h x w, in) 36 x 20
Reel arms 5
Reel diameter (cm) 173
Reel diameter (in) 68
Reel speed (rpm) 6.25
Auger diameter - lower (cm) 51
Auger diameter - lower (in) 20
Auger diameter - upper (cm) 51
Auger diameter - upper (in) 20

DON'T MISS OUT ON THE LATEST DEALS

Add us to your inbox to stay up to date and learn more

LOOKING FOR SOMETHING SPECIFIC? CONTACT US!