TYM Tractors T224

Overview

Smallest and most maneuverable
Engine power: 21.5 hp
Hitch lift capacity: 1100 lb

Perform the tasks of a full-size tractor, while enjoying the maneuverability of a riding mower. The T224 is the essential TYM Series 1 tractor, serving as an indispensable groundskeeper for every property owner.

Features

Ergonomic features for enhanced productivity

A wide operator cabin with a flat floor offers good visibility and ample leg room, promoting comfortable operation. All controls are within arm’s reach, including a dial to control the cutting height of the mid-mount implement. The accelerator, brake pedal, differential lock, and parking brake are easily accessible on the floor of the cabin, located precisely where you expect them to be. These features make this tractor easy to operate, even for novice drivers.

High torque, water-cooled Yanmar diesel engine

The Japanese made Yanmar engine offers more torque with less revs compared to competitors in its class. Since it is water cooled, the engine warms up faster and stabilized temperature more effectively while the tractor is running. The engine is also Tier 4 certified, including for noise emission standards.

Mid-mount linkage for mowing implements

The mid-mount linkage on the tractor allows easy installation for a mower up to 54 inches wide. Cutting height can be adjusted easily during operation using the dial on the operator console, so patches of overgrowth can be tackled more efficiently.

Easy to open hood for convenient maintenance

The tractor hood can be opened in one motion, providing easy access to the engine and other systems for daily checks, routine service and maintenance. The side panel can also be removed easily without the need for specialized tools.

Accessible fuel tank for simpler refueling

Located on the right side of the driver’s seat, the fuel tank of this tractor is easy to open with an ergonomically designed twist-off cap. The tank can be topped up with fuel, even when implements are connected to the tractor.

Foldable ROPS for storage in low-ceiling structures

The Roll Over Protective Structure (ROPS) of the tractor is designed to be folded, allowing for easy storage in low-ceiling garages or sheds.

Controls to speed up, slow down, raise or lower implements

Even while the tractor is in motion, a dedicated PTO lever can be used to speed up or slow down implement rpm, while the dial can raise and lower implements at the prescribed speed.

Hydrostatic transmission for infinitely variable drive speed

Responsive hydrostatic controls offers a smooth ride for operators, from the forward and reverse pedal to the powered steering wheel. These controls reduce the need for operator effort during a range of tasks, particularly while operating the optional front-end loader.

Specifications

Model	T224
Engine
Engine manufacturer	Yanmar 3TNV74F
Type	Natural Aspiration
Gross engine power	21.5 hp | 16 kW
PTO power	15.1 hp | 11.3 kW
Rated engine speed	3200 rpm
No. of cylinders	3
Displacement	60.6 cu. in.
Air cleaner	Single Dry
Alternator	12V, 40A
Fuel system	IDI
Powertrain
Transmission type	HST
No. of speeds	2 Range
Max. traveling speed	8.4 mph
Brakes	Wet Disc
Steering	Hydrostatic
Clutch	N/A
Hydraulic System
Pump type	Single Gear Pump
Implement flow	4.17 gpm
Steering flow	2.11 gpm
Total flow	6.28 gpm
Category, 3-point hitch	I (N)
Hitch lift capacity	1100 lbs.
Hitch lift capacity at 24 inches behind link ends	679 lbs.
Lift control type	Position
No. of standard remote valves	Optional (1)
PTO
PTO type	Independent
PTO control	Electric/Hydro
PTO rear	540 rpm
Capacities
Fuel tank	6.6 U.S. gal.
Coolant	3.7 qt.
Crankcase	1.9 qt.
Transmission/Hydraulic system	3.6 U.S.gal.
Front axle	2.6 qt.
Dimensions & Weights
Overall length with 3-point hitch	94.2 in.
Overall width	44.5 in.
Wheelbase	53.1 in.
Height to top of ROPS	86.6 in.
Min. ground clearance	8.3 in.
Min. turn radius without brakes	86.6 in.
Weight with ROPS	1472 lbs.
Standard Tires
R3 Turf - Front	Turf Master 16x7.50-8 NHS TL 4PR
R3 Turf - Rear	Turf Master 24x12.00-12 NHS TL 4PR
R4 Industrial - Front	WT300 18x8.5-10 NHS TL 4PR
R4 Industrial - Rear	WT300 26x12.00-12 NHS TL 4PR