Double tap to zoom


The series standard
Engine power: 23.9 hp
Hitch lift capacity: 1214 lb

This tractor is proof that good things can come in small packages. The T254 enables brings you greater power without compromising on maneuverability, backed by a powerful engine and ergonomic operator controls.


Ergonomic features for enhanced productivity

A wide operator cabin with a flat floor offers good visibility and ample leg room, promoting comfortable operation. All controls are within arm’s reach, including a dial to control the cutting height of the mid-mount implement. The accelerator, brake pedal, differential lock, and parking brake are easily accessible on the floor of the cabin, located precisely where you expect them to be. These features make this tractor easy to operate, even for novice drivers.

High torque, water-cooled Yanmar diesel engine

The Japanese made Yanmar engine offers more torque with less revs compared to competitors in its class. Since it is water cooled, the engine warms up faster and stabilized temperature more effectively while the tractor is running. The engine is also Tier 4 certified, including for noise emission standards.

2-range hydrostatic transmission for smooth operation

Accompanied by the power steering, the responsive 2-range hydrostatic controls on this tractor ensures a smooth ride. It reduces the need for operator effort, particularly while operating the optional front-end and rear implements.

3-point hitch with powerful lift capacity

The 3-point linkage on the rear has an impressive lift capacity that reaches the end ball joint. The rear PTO control can be used to adjust rpm based on the task, increasing it for more intensive ground engagement like slashing or digging.

Mid-mount linkage for mowing implements

The mid-mount linkage on the tractor allows easy installation for a mower up to 54 inches wide. Cutting height can be adjusted easily during operation using the dial on the operator console, so patches of overgrowth can be tackled more efficiently.

Foldable ROPS for storage in low-ceiling structures

The Roll Over Protective Structure (ROPS) of the tractor is designed to be folded, allowing for easy storage in low-ceiling garages or sheds.

Controls to speed up, slow down, raise or lower implements

Even while the tractor is in motion, a dedicated PTO lever can be used to speed up or slow down implement rpm, while the dial can raise and lower implements at the prescribed speed.

Hydrostatic transmission for infinitely variable drive speed

Responsive hydrostatic controls offers a smooth ride for operators, from the forward and reverse pedal to the powered steering wheel. These controls reduce the need for operator effort during a range of tasks, particularly while operating the optional front-end loader.


Model T254
Engine manufacturer Yanmar 3TNV80F
Type Natural Aspiration
Gross engine power 23.9 hp | 17.8 kW
PTO power 18.8 hp | 14.0 kW
Rated engine speed 3,000 rpm
No. of cylinders 3
Displacement 77.3 cu. in.
Air cleaner Single Dry
Alternator 12V, 40A
Fuel system IDI
Transmission type HST
No. of speeds Infinite 2 range
Max. traveling speed 11.0 mph
Brakes Wet Disc
Steering Hydrostatic
Clutch Dry Single Plate
Hydraulic System   
Pump type Single Gear Pump
Implement flow 4.18 gpm
Steering flow 2.77 gpm
Total flow 6.95 gpm
Category, 3-point hitch I (N)
Hitch lift capacity 1214 lbs.
Hitch lift capacity at 24 inches behind link ends 1101 lbs.
Lift control type Position
No. of standard remote valves Optional (1)
PTO type Transmission PTO w/ORC/Independent
PTO control Electric/Hydro
PTO rear 540 rpm
Fuel tank 5.81 U.S. gal.
Coolant 3.8 qt.
Crankcase 2.9 qt.
Transmission/Hydraulic system 3.7
Front axle 3.7 qt.
Dimensions & Weights   
Overall length with 3-point hitch 100.5 in.
Overall width 45.8 in.
Wheelbase 57.5 in.
Height to top of ROPS 91.3 in.
Min. ground clearance 9.4 in.
Min. turn radius without brakes 100 in.
Weight with ROPS 1638 lbs.
Standard Tires   
R3 Turf - Front Turf Master 20x8.00-10 NHS TL 4PR
R3 Turf - Rear Multi-Trac CS 29x12.50-15 NHS TL 4PR
R4 Industrial - Front Trac Chief 20x8.00-10 NHS TL 4PR
R4 Industrial - Rear Trac Chief 27x12.5-15 NHS TL 4PR
R4 Large Industrial - Front Trac Chief 23x8.50-12 NHS TL 4PR
R4 Large Industrial - Rear Trac Chief 12-16.5 NHS TL 6PR


Add us to your inbox to stay up to date and learn more