Double tap to zoom

Overview

Small-frame with enhanced lift
Engine power: 24 hp
Hitch lift capacity: 1534 lb

Get more work done quicker with this small-frame tractor. The T264 balances maximized lift capabilities and high maneuverability to be an all-round multi-tasking machine.

Features

Ergonomic features for enhanced productivity

A wide operator cabin with a flat floor offers good visibility and ample leg room, promoting comfortable operation. All controls are within arm’s reach, including a dial to control the cutting height of the mid-mount implement. The accelerator, brake pedal, differential lock, and parking brake are easily accessible on the floor of the cabin, located precisely where you expect them to be. These features make this tractor easy to operate, even for novice drivers.

Simple and effective TYM engine

This tractor comes equipped with the South Korean-made TYM engine and is naturally aspirated. The minimal design and minimized emissions results in a more efficient engine, lowering fuel and maintenance costs.

High capacity fuel tank to support time intensive work

The high capacity fuel tank allows drivers to take on jobs for longer periods without stopping for fuel. This is in addition to the engine, which promotes fuel-efficient operation and increases the time before a refuel.

Dual filter air cleaner for engine longevity

The tractor comes with an additional filter to protect the engine of the tractor from harmful particles, drastically extending the engine life.

Cast iron components for sturdier connections

To perform durably with heavier loads, the rear of the rear of this tractor features sturdy cast-iron components to connect implements. The material enhances efficiency of the hydraulics and helps increase component lifecycles.

Easy to open hood for convenient maintenance

The tractor hood can be opened in one motion, providing easy access to the engine and other systems for daily checks, routine service and maintenance. The side panel can also be removed easily without the need for specialized tools.

3-point hitch with powerful lift capacity

The 3-point linkage on the rear has an impressive lift capacity that reaches the end ball joint. The rear PTO control can be used to adjust rpm based on the task, increasing it for more intensive applications like slashing and digging.

Hydrostatic transmission for infinitely variable drive speed

Responsive hydrostatic controls offers a smooth ride for operators, from the forward and reverse pedal to the powered steering wheel. These controls reduce the need for operator effort during a range of tasks, particularly while operating the optional front-end loader.

Specifications

ENGINE  
Engine manufacturer TYM A1100N2
Type Natural Aspiration
Gross engine power 24 hp | 18 kW
PTO power 18.3 hp | 13.6 kW
Rated engine speed 2800 rpm
No. of cylinders 3
Displacement 71.7 cu. in.
Air cleaner Single Dry
Alternator 12V, 50A
Fuel system IDI
POWERTRAIN  
Transmission type HST
No. of speeds Infinite 2-Range
Max. traveling speed 12.9 mph
Brakes Wet Disc
Steering Hydrostatic
Clutch Dry Single Plate
HYDRAULIC SYSTEM  
Pump type Dual Gear Pump
Implement flow 4.4 gpm
Steering flow 2.7 gpm
Total flow 7.1 gpm
Category, 3-point hitch I
Hitch lift capacity 1534 lb
Hitch lift capacity at 24 inches behind link ends 1102 lb
Lift control type Position
No. of standard remote valves Optional (1)
PTO  
PTO type Independent
PTO control Electric/Hydro
PTO rear 540 rpm
CAPACITIES  
Fuel tank 6.6 gal
Coolant 5.9 qt
Crankcase 4.5 qt
Transmission/Hydraulics system 4.7 gal
Front axle 4.7 qt
DIMENSIONS & WEIGHTS  
Overall length with 3-point hitch 107.8 in.
Overall width 52.8 in.
Wheelbase 58.3 in.
Height to top of ROPS 89.8 in.
Min. ground clearance 7.71 in.
Min. turn radius with brakes 98.5 in.
Min. turn radius without brakes 105.5 in.
Weight with ROPS 1881 lb
Weight with cab 2399 lb
STANDARD TIRES  
R3 Turf - Front Turf Master 23x8.50-12 NHS TL 4PR
R3 Turf - Rear Multi-Trac CS 33x12.50-16.5 NHS TL 4PR
R4 Industrial - Front Trac Chief 23x8.50-14 NHS TL 4PR
R4 Industrial - Rear Trac Chief 12-16.5 NHS TL 6PR
R4 Large Industrial - Front Trac Chief 23x8.50-14 NHS TL 4PR
R4 Large Industrial - Rear Trac Chief 14-17.5 NHS TL 6PR

DON'T MISS OUT ON THE LATEST DEALS

Add us to your inbox to stay up to date and learn more

LOOKING FOR SOMETHING SPECIFIC? CONTACT US!