Komatsu AX50 Series IC Pneumatic

Double tap to zoom


Great design starts on the smallest level and with the Komatsu AX50 Series IC Pneumatic Forklift, no detail has been overlooked. Building on our 80-year history of superior engineering, the AX50 delivers improved performance and unbeatable strength for your most demanding applications. Using advanced Clean Air Technology, exhaust emissions are brought well below regulations to provide a more pleasant and productive work environment. The AX50 delivers the qualities you’ve come to count on in a Komatsu.


Dual Floating Structure

The Komatsu Komfort Zone design uses a dual floating structure that protects operators. One set of vibration-dampening mounts separate the forklift’s frame from the engine and transmission. A second set of suspension mounts isolate the operator compartment from the frame. In addition, drive-train design reduces vibration transmitted from the differential.

EZ View Mast System

Operator visibility is a key to productive forklift operations. The newly designed EZview mast and low-profile dash display gives an unrestricted view of the fork tips and surroundings. In the rear of the AX50, the upper corner of the counterweight angles sharply to give optimum visibility when moving in reverse.

Fully Hydostatic Power Steering

The AX50 Fully Hydrostatic Power Steering system reduces operator fatigue by eliminating kickback and allowing easy steering, even while the forklift is stationary. A small-diameter steering wheel improves operator feel and control.

High Efficiency Drive Train

A new transmission, designed and manufactured by Komatsu Forklift Limited, handles the high torque provided by the powerful K21 engine. A high-capacity oil cooler protects the torque converter, and an aluminum alloy transmission case improves heat dissipation. O-ring face seals designed for high-temperature, high-speed applications reduces the possibility of leaks in the pump, power steering circuit and torque converter cooler.

KOPS Plus Komatsu Operator Presence System

KOPS Plus – standard on the AX50 – locks out lift, lower, tilt and traveling functions when the operator leaves the seat for more than three seconds. They do not resume until the operator returns to the seat and resets the controls. A flashing yellow warning light alerts the operator when the KOPS lock is activated. In addition, the forks cannot be lowered while the key is in the off position.


GENERAL FG15HTU-20 FG18HTU-20      
Power Type LPG LPG      
Operation Type Sit-Down Sit-Down      
Capacity @ 24 in. (600mm) Load Center 3,000 lbs 3,500 lbs      
Load Distance  From Center Axle (2 Stage) 15.4 in 15.4 in      
Wheelbase 55.1 in  55.1 in       
WEIGHT FG15HTU-20 FG18HTU-20      
Service Weight 6,230 lbs 6,700 lbs      
Loaded Front 7,190 lbs 8,640 lbs      
Loaded Rear 1,311 lbs 1,543 lbs      
Unloaded Front 2,500 lbs 2,360 lbs      
Unloaded Rear 3,730 lbs 4,340 lbs      
TIRES FG15HTU-20 FG18HTU-20      
Tire Type Pneumatic Pneumatic      
Front 6.5 - 10 - 10PR (I) 6.5 - 10 - 10PR (I)      
Rear 5 - 8 - 8PR (I) 5 - 8 - 8PR (I)      
Number of Wheels, Front/Rear 2x / 2 2x / 2      
Front 35 in 35 in      
Rear 35.2 in 35.2 in      
Tilting Angle, Forward/Backward 6 / 8 deg 6 / 8 deg      
Lowered 85.5 in 85.5 in      
Extended 176 in 176 in      
Free Lift Height 5.5 in 5.5 in      
Maximum Fork Height 128 in 128 in      
Height Overhead Guard 81.5 in 81.5 in      
Length, with Standard Forks 129.7 in 131.3 in      
Length to Fork Face 87.6 in 89.2 in      
Overall Width at Drive Tires 42.1 in 42.1 in      
Forks, Thickness x Width x Length 1.6 x 4 x 42.1 in 1.6 x 4 x 42.1 in      
Carriage Width/ITA Class 41 in / II 41 in / II      
Ground Clearance, Under Mast 5.5 in 5.5 in      
Ground Clearance, Center of Wheelbase 5.1 in 5.1 in      
Right Angle Stacking Aisle 92.4 in 93.7 in      
Turning Radius, Outside 77 in 78.3 in      
Travel Speed, Loaded/Unloaded 11.8 / 12.4 mph 11.8 / 12.4 mph      
Lifting Speed, Loaded/Unloaded 135 / 138 fpm 135 / 138 fpm      
Lowering Speed, Loaded/Unloaded 98 / 98 fpm 98 / 98 fpm      
Maximum Drawbar Pull, Loaded 3,700 lbs 3,700 lbs      
Maximum Gradeability 39% 35%      
Service Brake, Operation/Control Foot / Hydraulic Foot / Hydraulic      
Parking Brake, Operation/Control Hand / Mechanical Hand / Mechanical      
Steering Type FHPS FHPS      
DRIVE FG15HTU-20 FG18HTU-20      
Engine Manufacturer / Engine Model GCT / K21 GCT / K21      
Rated Output (SAE Net) 56 HP @ 2,700 rpm 56 HP @ 2,700 rpm      
Maximum Torque (SAE Net) 119 lb-ft @ 1,600 rpm 119 lb-ft @ 1,600 rpm      
# of Cylinders / Displacement 4 / 126 cu in 4 / 126 cu in      
Fuel Tank Capacity 11 US Gallons 11 US Gallons      
OTHER FG15HTU-20 FG18HTU-20      
Relief Pressure, Maximum 2,650 psi 2,650 psi      
Transmission Powershift Powershift      
Sound Level  84dB 84dB      


Add us to your inbox to stay up to date and learn more